Gelcoats are a crucial component in many composite products. The gel coat is generally a polyester resin mixed with pigment. Gel coats are the exterior protection of composite products such as fiberglass boats, wind turbine blades, bath tubs, and more.
The application of a gel coat is almost as much an art form, as it is a science. A quality gel coat operator is hard to come by, and experience is priceless. Additionally, there are countless variables that play a role in the performance and quality of a gel coat. These include:
Not all gel coats are equal, chemistry wise. Gel coats by nature are thick, partly due to the resin and the large particle size of the pigments used. To thin gel coats, styrene is added. In fact, most gel coats always had upwards of 45% styrene.
Different gel coats from different manufacturers will perform differently. Each has different chemical formulas, and each might have a different percentage of styrene. It is because of this, that extra attention needs to be given prior to working with an unfamiliar gel coat.
A gel coat will generally have a short shelf life, between 90-120 days usually. This shelf life is reduced dramatically if the gel coat is stored in temperatures about 26oC degrees, common rule of thumb is that the shelf life is reduced in half for every 5 degrees above 26oC.
As a gel coat ages, it can thicken, not cure properly, or tiny specks begin to appear call “seeding.” Either way, this can affect the performance of the gel coat. Having fresh gel coat is essential to making high quality and consistent composite products.
Gel coats are made to be used at a temperature above 15°C. Below 15°C, several factors are affected. The lower the temperature:
All of these affect flow rates and atomization and make sag possible. Cold weather can also result in a less cosmetically pleasing product. Slower gel and cure times of gel coats caused by cold conditions may lead to post cure. This can be visible as print-through or distortion.
Pieces of advice for using gel coats in cold conditions:
As mentioned earlier, proper application of a gel coat is crucial to the quality. For example, the person spraying the gel coat needs to be the proper distance from the mold and move the gun at just the right speed to apply around 6 mil of gel coat.
This is not an easy task and when gel coating a large part, it can become confusing knowing how many passes of gel coat have been applied . Ideally, the gel coat applicator will apply 18 mils total gel coat , in 3 passes . Applying a single color of gel coat can be difficult, but imagine trying to apply multiple colors of gel coat to the same part, this can become quite the art form.
Gel coat is a crucial component of aesthetic composite products. It provides the protection and it is the outward expression of the composite material. It is important that the gel coat is applied properly, and all the variables which can affect the gel coat are reduced.By doing so, a beautiful and long lasting product can be produced.
Shimi Pooshesh Kala Co. Taking the benefits of 30 years experience in Paint and composite industries, Shimi Pooshesh Kala Company (Chekad) was founded in 2000, in Ivanaky industrial zone, near Tehran-Iran. Chekad is active in production, commerce, import and supply powder coating, paint and composite materials. Chekad motto is acquisition in the field of its customer satisfaction through providing and supplying quality products and rendering satisfactory services.