Shimi Pooshesh Kala co. (Chekad) supply a wide range of additives for powder coating system as below:

 

 

Special Texture Additives

Application

Code

Description

Image

Special Texture Agent

XG605-1A

- Is specially made for producing wrinkle powder coatings.
 
- It is mostly applied in Epoxy, Hybrid powder coatings systems.

Cameo Agent

BBM

- Is poly-acrylate which may be used to produce hammer tone powder coatings.
 
- Both BBM and BBWK can be applied in Epoxy, Hybrid and Polyester powder coatings systems, and they must be dry blended with the coatings.
 
- The dosage of BBM and BBWK is about 0.1-2% of total formulation.

Cameo Agent

BBWK

- Is poly-acrylate which may be used to produce hammer tone powder coatings.
 
- Both BBM and BBWK can be applied in Epoxy, Hybrid and Polyester powder coatings systems, and they must be dry blended with the coatings.
 
- The dosage of BBM and BBWK is about 0.1-2% of total formulation.

Sand-Texture Agent

SW301B

- Aplicable to all kinds of powder coating.
 
- Is specially made for producing Sand-texture powder coatings.
 
- The dosage of SW301B is about 0.02-0.5% .

Sand-Texture Agent

SW301C

- Aplicable to all kinds of powder coating.
 
- Is specially made for producing Sand-texture powder coatings.

- The dosage of SW301C is about 0.5-1.0%.

 

 

 

Charge control agent

Application

Code

Description

Image

Anti-Static Agent

DH-103

- Its used to adjust the conductivity of powder coating.

- DH103 can minimize the Faraday Effect and improve the coating ratio esp.

- Dosage: 0.1-0.5% based on total amount.

Triboelectric Agent

TB-1

- It can be used in all kinds of powder coating.

- Improve the electric charging property of the powder.
 
- Dosage: 1-4%.

 

 

Matting series

Application

Code

Description

Image

Matt Hardener

XG 603-1A

- Can be applied both in pure epoxy and hybrid powder coating .Gloss range from 5~10% in epoxy coating and 10~70% in Hybrid coatings.
 
- Color & gloss stability under normal baking condition.

Click on the image to get the XG 603-1A matting additive formula

Matt Hardener

XG 665

- Can be applied in HAA or TGIC powder coatings system.
 
- In systems gloss level is less than 5% @60 O angel.

Matting Agent

XG607B

- Can be applied in TGIC powder coating system.
 
- It can obtain lowest 10% gloss in TGIC system.

Matting Agent

XG 610B

- Can be applied in hybrid powder coating.

- In systems gloss level is less than 5% @60O angel.

- Excellent impact properties
 
- Flowing and yellowing resistance

Click on the image to get the XG 610B matting additive formula

Matt Hardener

XG 605W

- Can be applied in TGIC or hybrid powder coating system.
 
- The dosage of XG605W is 5-8% of resins, suitable for matt finishes with 30-60% gloss(60℃)
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 607C

- Is kind of composite matting agent.
 
- The dosage of XG607C is 1-6%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Click on the image to get the XG 607C matting additive formula

Matting Agent

XG 607E

- Is kind of composite matting agent.
 
- The dosage of XG607E is 1-8%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 610A

- Is kind of compound anti-yellowing matting agent.
 
- The dosage of XG610A is 3-5%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 610C4

- Is kind of compound matting agent containing carboxyl.
 
- The dosage of XG610C4 is 1-3%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 610H

- Is kind of compound matting agent containing carboxyl.
 
- The dosage of XG610H is 1-5%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 620A

- Is kind of compound matting agent for Hybrid system.
 
- The dosage of XG620A is 1-4%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 640B

- Is kind of compound matting agent based on acrylic resin.
 
- The dosage of XG640B is 1-5%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 640

- Is a compound matting agent containing carboxyl.
 
- The dosage of XG640 is 3-5%.
 
- Backing condition: 190℃/15 min, or 200℃/12min.

Matting Agent

XG 640A

- Is a kind of compound matting agent based on acrylic resin.
 
- The dosage of XG640A is 1-5%.
 
- Backing condition: 190℃/15 min - 200℃/12min.

Matting Agent

XG 640C

- Is a kind of compound matting agent for Hybrid system.
 
- The dosage of XG640C is 1-3%.
 
- Backing condition: 190℃/15 min or 200℃/12min.

Matting Agent

XG 640K

- Is acrylic resin based compound agent.
 
- The dosage of XG640K is 1-3%. It is suitable for 10-30% gloss formulations.
 
- Backing condition: 190℃/15 min - 200℃/12min.

 

 

Leveling series

Application

Code

Description

Image

Leveling Agent

BLC 701

- Can be applied in all categories of powder coatings, which is developed to correct imperfection such as craters, pinholes and fisheyes.
 
- The dosage of BLC701 is about 0.5-1.5% of total formulation.

Leveling Agent

BLC 701B

- Can be used in all system of powder coatings.
 
- The dosage of BLC701B in formulation is about 0.5-1.5% wt.

Leveling Agent

GLP 788

- Can be used in all system of powder coatings.

- Dosage: 5-1.2%wt.

Leveling Agent

GLP 588

- Can be used in all system of powder coatings.

- Dosage: 0.7-1.5%wt.

Leveling Agent

GLP 388

- Can be used in all system of powder coatings.

- Dosage: 0.7-1.5%wt.

Leveling Agent

GLP 288

- Can be used in all system of powder coatings.

- Dosage: 1-1.5%wt.

Leveling Agent

GLP 1202

- Can be used in all system of powder coatings.
 
- Dosage: 0.5-1.5%wt.

Leveling Agent

GLP 100

- It can be applied in all kinds of powder coatings.

 
- Dosage: 0.7-2%.

Leveling Agent

W1

- It can help to reduce the film melt viscosity.
 
- W-1 advance the fluidity of the melt coatings.

- The dosage of W-1 is about 0.5-1.5%wt.

 

 

 

Degassing Agent

Application

Code

Description

Image

Degassing Agent

Benzoin

- An organic compound which is used for degassing in powder coating.
 
- Dosage is about 0.3-0.8% of whole formulation.

Degassing Agent

Benzoin (Powder)

- Can be applied in all system powder coating.

- Dosage is between 0.36-0.96%.

Degassing Agent

XP 103

- It applied in all types of powder coatings.

- The dosage of XP103 is 1-3%.

Degassing Agent

XP 101

- It applied in all types of powder coatings.

- The dosage of XP101 is 0.3-1.0%.

 

 

 

Catalysts

Application

Code

Description

Image

Catalyst

JG 804

- Can be used as a high reactive catalyst in TGIC system and hybrid system.
 
- Improves reaction speed.
 
- Remarkably lower the curing condition.
 
- Anti-yellowing property.

Catalyst

JG 804A

- Can be used as a high reactive catalyst in TGIC system and hybrid system.

 

 

 

Hardener series

Application

Code

Description

Image

Hardener

TGIC

- Good heat resistance, weather resistance, adhesion excellent high temperature stability compared with BPA resins. It's widely used as curing agent (cross-linker) for outdoor poly ester powder coatings.

Epoxy Curing Agent

GHF 2252

- It's a kind of Phenolic resin which can cure fast under low temperature. It's developed by reaction of BPA and epoxy resin.
 
- Can cure under 1200C in 25 min. Curing time can be lessend by choosing lower EEW epoxy resin.

Epoxy Curing Agent

GHF 2253

- It's a kind of Phenolic resin which can cure fast under low temperature. It's developed by reaction of BPA and epoxy resin.
 
- Good properties of flow, anti-corrosive & mechanism.
 
- Can cure under 1200C/40-45 min. Curing time can be lessened by choosing lower EEW epoxy resin. GHF 2253 can also cure under 2000C/2 mins.

Curing Agent

T 105

- Is suitable for the production of outdoor polyester powder coating (HAA).
 
- Curing condition ranges from 2000C/5 mins to 1500/20 mins, 1800C/15 mins.

Curing Agent

T 105M

- Could be used in similar way as T105, with less dosage of Benzoin.
 
- Low toxicity, no corrosion, no flammability, no irritant to skin, good durability.
 
- Surface obtained good flow & less yellowing.

Epoxy Curing Agent

GHF 2250

- Is a kind of phenolic resin which can cure fast under low temprature.
 
- It Can react with normal epoxy resin.

Curing Accelerator

JG 803A

- Can be used as hardener in high reactive epoxy resin powder coating and as accelerator in dicyandiamide or hybrid powder coating.
 
- Curing condition in epoxy formulation ranges from 1200C/30 min to 2000C/5 mins.

 

 

 

Thickening

Application

Code

Description

Image

Thickening Rheological

Bentonite 34

- Its characteristic of suspension property.

- Thixotropy, stability, good anti-sedimentation sbility in painting.

- Adding as dry powder for in-situ dispersion and activation.

 

 

 

Anti-Scratch

Application

Code

Description

Image

Anti-Scratch Agent

MR - 1

- Can be used in all kinds of powder coatings.
 
- Dosage is 0.1-0.6%.

 

 

 

 

error: Content is protected !!
لیست دریافت اطلاعات هنگامیکه این محصول موجود شود به شما اطلاع رسانی خواهد شد. لطفا یک آدرس ایمیل معتبر وارد کنید.